Special Purpose Distribution Transformers
TAILI 3D amorphous alloy transformer adopts a three-dimensional amorphous alloy wound core structure with fully symmetrical and seamless three-phase magnetic circuits.
The advantages of amorphous alloy transformer i s low loss and efficient energy-saving.
Vibration-damping pads are applied between the core and the tank, to reduce the operating nose below to 50 dB, which is much quieter than traditional transformers.
It is pupular used in residential areas, hospitals, and schools.
Basic Info.
TAILI 3D Amorphous Alloy Transformer is an energy-saving amorphous alloy transformer designed for medium-voltage distribution networks. By using an amorphous alloy core instead of traditional silicon steel, it helps reduce no-load loss, improve energy efficiency, and support stable long-term operation in urban grids, industrial plants, renewable energy stations, and commercial power distribution systems.
TAILI amorphous alloy transformer adopts an amorphous metal core with high magnetic permeability and low coercivity. This core structure helps reduce magnetization loss during continuous operation, making it suitable for energy-saving distribution networks and low-carbon power projects.
As a professional amorphous alloy transformer manufacturer, TAILI provides customized transformer solutions for utility grids, industrial plants, renewable energy stations, commercial buildings, data centers, and urban power distribution projects. The transformer can be designed according to different voltage levels, capacity requirements, vector groups, impedance values, installation conditions, and project standards.
This 3D amorphous alloy transformer combines amorphous alloy core technology with a stable oil immersed insulation and cooling structure. The oil immersed amorphous alloy transformer design provides reliable heat dissipation, strong insulation performance, and stable operation under demanding outdoor or industrial environments.
The compact 3D core layout helps improve magnetic circuit balance, reduce vibration, and support low-noise operation. It is especially suitable for locations where energy efficiency, space utilization, and long service life are important.
| Primary Voltage | 35, 34.5, 24, 20, 15, 13.8, 13.2, 11, 10.5, 10, 6.3, 6 kV or others |
| Secondary Voltage | 600 V, 480 V, 415 V, 400 V, 380 V or others |
| Vector Group | Dyn11, Dyn5, Yyn0 or others |
| Impedance | 4%, 6% |
| Capacity (Power Rating) | 30 kVA, 45 kVA, 75kVA, 112.5kVA, 150kVA, 225kVA, 300kVA, 500kVA, 1000kVA, 1500 kVA, 2000 kVA, 2500kVA, 3000kVA |
| H.V. Tap Range | ±2 × 2.5% or others |
| BIL (Basic Insulation Level) | 30–150 kV |
| Standards | IEC, IEEE, ANSI, DOE |
| Certificates | CE, SGS, CNAS |
TAILI amorphous alloy distribution transformer is widely used in power systems where long operating hours and energy-saving performance are important.
Typical applications include:
· Urban and rural power distribution networks
· Industrial manufacturing plants
· Commercial buildings and shopping centers
· Renewable energy stations
· Solar and wind power projects
· Data centers and telecom power systems
· Utility substations
· Mining, oil, gas, and infrastructure projects
· Smart grid and energy-saving grid renovation projects
For projects with frequent light-load operation, the low no-load loss of an amorphous alloy transformer can bring stronger long-term energy-saving value.
Features of 3D Amorphous Alloy Transformer
1. Ultra-low no-load loss
The amorphous alloy core features extremely low hysteresis loss, resulting in significantly reduced no-load losses.
2. 3D symmetrical magnetic circuit
Fully symmetrical three-phase magnetic paths ensure uniform flux distribution and reduced leakage flux.
3. Excellent energy-saving performance
Especially suitable for long-term light-load or no-load operation.
4. Low operating noise
The 3D core design reduces magnetostriction effects and operational noise.
5. Compliant with high energy-efficiency standards
Meets or exceeds energy efficiency requirements in many regions.
6. Environmentally friendly design
Contributes to reduced energy consumption and carbon emissions.
Production of 3D Amorphous Alloy Transformer
Package and Shipping
Service System
Pre-sales support
- Provide customized power distribution scheme design to optimize cabinet size, equipment layout and product configuration;
- For special needs (such as non-standard voltage, explosion-proof certification), provide detailed technical solutions within 12 hours.
Routine Test
Measurement of winding resistance
Measurement of voltage ratio
Check of vector group
Mesurement of impendance voltage and load loss
Measurement of no load oss and current
Separate-source voltage withstand test
Induced overvoltage withstand test
Dimension checking
Type Test
Lighting impulse test
Temperature rise test
After-sales guarantee
- Quick response: reply to fault report within 24 hours, remote debugging or on-site service within 48 hours (domestic);
- Regular return visits: inspect the operation status of the equipment free of charge every year and provide maintenance suggestions;
- Transparent service: the cause of the failure is explained in writing, the maintenance cost is priced according to the market standard, and the cost is refunded on the spot for valid complaints;
- Warranty policy: 1-3 years warranty for the whole machine (according to the model), lifetime costprice spare parts supply.
TAILI provides customized 3D Amorphous Alloy Transformer solutions for different project requirements. Our engineering team can support transformer selection based on load profile, installation environment, voltage level, grid standard, cooling requirement, and operation conditions.
Customization options include:
· Rated capacity
· Primary and secondary voltage
· Vector group
· Impedance voltage
· Tap changer range
· Oil tank structure
· Terminal arrangement
· Protection accessories
· Low-noise design
· Special climate or outdoor design
· IEC, IEEE, ANSI, DOE and project-specific standards
Whether you need a 10kV amorphous alloy transformer, 11kV amorphous alloy transformer, 35kV amorphous alloy transformer, or a customized oil immersed amorphous alloy transformer for industrial distribution, TAILI can provide a suitable technical solution.
Looking for a reliable 3D Core Efficiently Distribution Transformer manufacturer? Contact TAILI for customized amorphous alloy transformer solutions, technical selection support, and project quotation.
What is a 3D Amorphous Alloy Transformer?
A 3D Amorphous Alloy Transformer is an energy-saving transformer that uses an amorphous alloy core and optimized 3D magnetic circuit structure to reduce no-load loss and improve distribution efficiency.
What is the main advantage of an amorphous alloy transformer?
The main advantage is lower no-load loss. This makes the amorphous alloy transformer suitable for distribution networks where transformers remain energized for long periods.
Is this an oil immersed amorphous alloy transformer?
Yes. TAILI can provide oil immersed amorphous alloy transformer solutions with reliable insulation, cooling performance, and fully sealed tank design.
What voltage levels are available?
Common voltage levels include 6kV, 10kV, 11kV, 20kV, 33kV, and 35kV. Custom voltage designs are also available.
What capacity range can be supplied?
TAILI can supply amorphous alloy transformers from small distribution capacities to larger project requirements, such as 30kVA to 2500kVA or customized ratings.
Where are amorphous alloy distribution transformers used?
They are used in urban grids, rural power networks, industrial plants, commercial buildings, renewable energy stations, data centers, and utility substations.
Can TAILI customize the transformer according to our project?
Yes. Capacity, voltage, vector group, impedance, tap range, cooling structure, accessories, and standards can be customized according to your project needs.
