Amorphous Alloy Dry Type Transformers
TAILI Amorphous alloy core dry type transformer is a perfect combination of an amorphous alloy core and a resin-insulated dry-type transformer. It is a new type of energy-saving transformer. It has the energy-saving performance of an amorphous alloy core, while keeping all the features of a resin-insulated dry-type transformer.
Basic Info.
| Primary Voltage | 35, 34.5, 24, 20, 15, 13.8, 13.2, 11, 10.5, 10, 6.3, 6 kV or others |
| Secondary Voltage | 600 V, 480 V, 415 V, 400 V, 380 V or others |
| Vector Group | Dyn11, Dyn5, Yyn0 or others |
| Impedance | 4%, 6% |
| Capacity (Power Rating) | 30 kVA, 45 kVA, 75kVA, 112.5kVA, 150kVA, 225kVA, 300kVA, 500kVA, 1000kVA, 1500 kVA, 2000 kVA, 2500kVA, 3000kVA |
| H.V. Tap Range | ±2 × 2.5% or others |
| BIL (Basic Insulation Level) | 30–150 kV |
| Standards | IEC, IEEE, ANSI, DOE |
| Certificates | CE, SGS, CNAS |
Product Features：
1. Low partial discharge and long service life.
2. No oil, no pollution, flame-retardant and self-extinguishing.
3. Easy installation, no debugging needed, maintenance-free, low operating cost.
4. Equipped with a complete temperature protection and control system for safe operation.
5. Coils are resin-cast for high mechanical strength, improving short-circuit withstand capability.
6. Excellent moisture and corrosion resistance—ideal for harsh environments. After shutdown, it can be put back into service without drying.
7. High energy efficiency:
It reduces no-load loss by about 60% and no-load current by about 60% compared with SCB10 transformers of the same capacity.
Second, the core advantages and characteristics of the product
Package and Shipping
Service System
Quality Control: Our quality control system is comprehensive and multi-faceted. From the initial selection of high-grade raw materials sourced from reliable suppliers, we ensure that every component used in our products meets the highest quality standards.
Routine Tests:
Measurement of winding resistance
Measurement of voltage ratio
Check of vector group
Mesurement of impendance voltage and load loss
Measurement of no load oss and current
Separate-source voltage withstand test
Induced overvoltage withstand test
Dimension checking
Type Tests
Lighting impulse test
Temperature rise test
