3D Core Efficiently Distribution Transformer
TAILI 3D amorphous alloy transformer adopts a three-dimensional amorphous alloy wound core structure with fully symmetrical and seamless three-phase magnetic circuits.
The advantages of amorphous alloy transformer i s low loss and efficient energy-saving.
Vibration-damping pads are applied between the core and the tank, to reduce the operating nose below to 50 dB, which is much quieter than traditional transformers.
It is pupular used in residential areas, hospitals, and schools.
Basic Info.
| Primary Voltage | 35, 34.5, 24, 20, 15, 13.8, 13.2, 11, 10.5, 10, 6.3, 6 kV or others |
| Secondary Voltage | 600 V, 480 V, 415 V, 400 V, 380 V or others |
| Vector Group | Dyn11, Dyn5, Yyn0 or others |
| Impedance | 4%, 6% |
| Capacity (Power Rating) | 30 kVA, 45 kVA, 75kVA, 112.5kVA, 150kVA, 225kVA, 300kVA, 500kVA, 1000kVA, 1500 kVA, 2000 kVA, 2500kVA, 3000kVA |
| H.V. Tap Range | ±2 × 2.5% or others |
| BIL (Basic Insulation Level) | 30–150 kV |
| Standards | IEC, IEEE, ANSI, DOE |
| Certificates | CE, SGS, CNAS |
Product Features of 3D Triangular Oil-Immersed Transformer
1. Ultra-low no-load loss
The amorphous alloy core features extremely low hysteresis loss, resulting in significantly reduced no-load losses.
2. 3D symmetrical magnetic circuit
Fully symmetrical three-phase magnetic paths ensure uniform flux distribution and reduced leakage flux.
3. Excellent energy-saving performance
Especially suitable for long-term light-load or no-load operation.
4. Low operating noise
The 3D core design reduces magnetostriction effects and operational noise.
5. Compliant with high energy-efficiency standards
Meets or exceeds energy efficiency requirements in many regions.
6. Environmentally friendly design
Contributes to reduced energy consumption and carbon emissions.
Second, the core advantages and characteristics of the product
Package and Shipping
Service System
Pre-sales support
- Provide customized power distribution scheme design to optimize cabinet size, equipment layout and product configuration;
- For special needs (such as non-standard voltage, explosion-proof certification), provide detailed technical solutions within 12 hours.
Routine Test
Measurement of winding resistance
Measurement of voltage ratio
Check of vector group
Mesurement of impendance voltage and load loss
Measurement of no load oss and current
Separate-source voltage withstand test
Induced overvoltage withstand test
Dimension checking
Type Test
Lighting impulse test
Temperature rise test
After-sales guarantee
- Quick response: reply to fault report within 24 hours, remote debugging or on-site service within 48 hours (domestic);
- Regular return visits: inspect the operation status of the equipment free of charge every year and provide maintenance suggestions;
- Transparent service: the cause of the failure is explained in writing, the maintenance cost is priced according to the market standard, and the cost is refunded on the spot for valid complaints;
- Warranty policy: 1-3 years warranty for the whole machine (according to the model), lifetime costprice spare parts supply.
